Fw218.1 FORK TAIL MALLET
$650 (limited initial prototype release)
Year made- 2018, Revision No. 1, Number produced- Prototype Run less than 25
Model FW218.1 is a twin tail mallet design exhibiting a unique array of sight lines for improved alignment. Along with the twin tail design there are three horizontal in the cavity and two vertical lines on the heel and toe pads. This setup gives the player added references to accurately aim the putter head.
This is the first model to incorporate adjustable weight screws into the sole providing additional flexibility when making different length putters
The short slant overfit neck provides a clean view of the top line while allowing the desired offset and shaft position.
Offset is 3/4 shaft and the neck is positioned slightly more towards the center of this model giving it a hanging angle of 25 degrees. Loft is set at 3 degrees. Each head is machined from a single solid block of 303 stainless steel while the necks are separately machined, hot formed and precisely welded to the head. The heads are finished with a glare resistant blasted finish.
SPECIFICATION
FW218.1 Forktail Mallet Putter Specifications | |
Back Design Style | Twin Split Tail Cavity |
Head Material | 303 Stainless Steel |
Finish | Low Glare Glass Bead Blast |
Neck/Hosel Type | Short Slant Overfit |
Sight Line |
Triple Horiz. Dual Vert. |
Head Hanging Angle | 25 Degrees |
Head Weight | 365 grams, +/- 10 gm |
Loft | 3 degrees |
Lie | 71 degrees |
Offset | 3/4 Shaft |
Shaft | True Temper, stepped, 0.370 tip |
Grip | Lamkin, deep etched paddle |
Standard Length | 34 in. |
Face | Outlined, Cross Milled Hitting Area |
FOLLOW US
Plus 2 International, Inc.
2790 Loker Ave. West, Unit 104
Carlsbad, CA 92010