B201.5 Step Back
 

ART AND BALANCE and CLASSIC STYLE

Year made- 2001, Revision No. 5, Number produced- 300

Model B201.5 is classic heel-toe weighted blade style head with a central cavity for balance and alignment. The toe and heel masses are designed in a double step pattern with each step approximately one third of the putter's width. The steps are cut parallel to the face and provide perfect visual symmetry and aesthetically pleasing edges to aid alignment. The heel and toe masses are positioned using computer aided design techniques for perfect balance. As with all the models, edges and cavities are machined perfectly parallel unlike cast putters that must incorporate small draft angles. These perfect angles help align the putter head.

Each putter is machined from a single solid block of carbon steel which starts with a weight of approximately 11 pounds. This technique ensures continuous metallurgical grain flow throughout the head and neck and consistent harmonics from putter to putter

The patented Long Barrel Straight Slant Neck provides improved feel by making a better connection between shaft and head, while giving a clean look at address. The extended socket provides a deeper shaft insertion, less vibration at impact, and super solid feel.

The patented sighting system incorporates a positive raised center line, with recessed dual outside lines for sure alignment under any lighting conditions. No matter the position of the sun, the raised center line casts a small helpful shadow for alignment aid.

Although not containing an actual face insert, the engraved insert outline and cross milled interior provide confidence building visual reference to frame the ball at address.

Offset is full shaft and the neck is positioned more into the heel of this model giving it a hanging angle of 36 degrees. Loft is set at 4 degrees. Models are machined from a single piece of soft carbon steel and satin nickel plated with a glare and corrosion resistant finish.


 
HEAD COVERS
SHAFT BANDS
GRIPS
   
   

B201.5 Step Back Putter Specifications

Back Design Style Heel Toe, Step Back
Head Material One Piece Mild Carbon Steel
Finish Satin Nickel (low glare/non rust)
Neck/Hosel Type Long Barrel Straight Slant
Sight Line Raised Center, Double Outside
Head Hanging Angle 36 degrees
Head Weight 340grams, +/- 2
Loft 4 degrees
Lie 71 degrees
Offset Full Shaft, (0.185 in. )
Shaft True Temper, stepped, 0.370 tip
Grip Lamkin, deep etched paddle
Standard Length 35 in.
Face Outlined, Cross Milled Hitting Area
Legal notice | Privacy policy
Design and studio photography by Plus 2 International, Inc.
Selected product photography by Jeff Lucero and Camada Sports
Copyright 2003, Plus 2 International, Inc. All rights reserved.